Bambu Lab AMS 2 Pro
$449.00
Brand: Bambu LabFour-slot Bambu Lab AMS 2 Pro with built-in filament drying to 65 °C, sealed storage, RFID sync and auto-rotating spools.
- In stock
- Priced in CAD
- Purchase orders and quotes for schools
- Authorized Canadian Bambu Lab reseller
About the Bambu Lab AMS 2 Pro
Bambu Lab AMS 2 Pro enables filament drying and multi-material printing. It is the second-generation four-slot AMS: it dries filament to 65 °C while it feeds, stores spools in an airtight chamber, and reads Bambu Lab RFID spools to set drying and print settings itself.
Key Features
- 24 colours / multi-material: serially connect up to 4 AMS 2 Pro and 8 AMS HT units, a total of 24 filaments
- Electro-magnetic air vent: automated venting facilitates dehumidification during drying and ensures airtight sealing for weeks of high-quality printing
- 65 °C drying: up to 65 °C drying temperature (Bambu Lab: the maximum is reached only when the ambient temperature is above 25 °C)
- Dry filament quickly and intelligently
- Auto-rotate drying: during the drying process, the filament spools rotate automatically to ensure more even drying
- RFID sync: AMS 2 Pro uses RFID to auto-match drying settings for Bambu official filaments, no manual input needed
- Brushless motor, faster multi-material printing: in Bambu Lab’s testing, the Bambu permanent magnet synchronous servo motor accelerates filament feeding by 60% and saves an average of 10 minutes per 100 filament changes
- Works with every current Bambu Lab printer; some need an adapter, buffer or switching adapter (see below)
Which option to pick
The selector asks for your printer and how many units you will connect. These are Bambu Lab’s own ordering options; every option costs the same. Bambu Lab: “Please check ‘What’s in the box’ section below. Some accessories are included, you may purchase extra as needed.” Bambu Lab’s connection rules for its AMS units on these printers:
- H2D or H2C: one or two AMS 2 Pro units connect with nothing extra; three or more need the 4-in-1 PTFE Adapter II (SA014), one of which is in the H2C box. See our Bambu 4-in-1 PTFE Adapter page.
- H2S: two or more AMS 2 Pro units need a 4-in-1 PTFE Adapter (FAZ013-N). See our Bambu 4-in-1 PTFE Adapter page.
- P2S: one or two AMS 2 Pro units need the Filament Buffer – P2S (SA011); the P2S Combo already includes one, the standalone P2S does not.
Drying power: Bambu Lab: “H2/P2/X2D printers can power one AMS 2 Pro unit for drying without the switching adapter. To dry filaments in multiple units simultaneously, each additional AMS 2 Pro unit requires its own Switching Adapter.” On A1, P1 and X1 series printers, one Switching Adapter is required for each AMS 2 Pro unit. For X1 and P1 series printers Bambu Lab also lists a Filament Buffer (SA003) or AMS Hub (SA002-N), a PTFE Tube Coupler (FAZ006) and a 4-pin cable (CAB002-N); our P1S AMS 2 Pro Combo includes what the P1S needs.
Specifications
| Dimensions | 372 x 280 x 226 mm (14.6 x 11.0 x 8.9 in) |
| Net weight | 2.5 kg (5.5 lb) |
| Housing material | ABS/PC |
| Filament supported | PLA, PETG, ABS, ASA, PET, PA, PC, PVA (dried), BVOH (dried), PP, POM, HIPS, Bambu PLA-CF, PAHT-CF, PETG-CF, Support for PLA/PETG, and TPU for AMS |
| Filament not supported | TPE, generic TPU, PVA (damp), BVOH (damp), Bambu PET-CF, TPU 95A, and other filament that contains carbon fibre or glass fibre |
| Filament diameter | 1.75 mm |
| Spool dimension | Width 50 to 68 mm (2.0 to 2.7 in); diameter 197 to 202 mm (7.8 to 8.0 in) |
| RFID identification | Supported |
| Drying, highest temperature | 65 °C (149 °F) (see note) |
| Drying, filament supported | PLA, PETG, Support for PLA/PETG, ABS*, ASA*, PET*, PA*, PC*, PVA*, BVOH*, PP, POM*, HIPS*, Bambu PLA-CF*, PAHT-CF*, PETG-CF*, and TPU for AMS* |
| Active moisture discharge | Supported |
| Sealed storage | Supported |
| Temperature and humidity detection | Supported. Real-time temperature and humidity can be displayed on the screen, Bambu Studio, and Bambu Handy |
| Power input | 24 V 4 A |
Figures are Bambu Lab’s published specifications for the Canadian (100 to 120 V) units; inch, pound and Fahrenheit values in brackets are our conversions.
* Filaments marked with * require a higher drying temperature. The AMS 2 Pro cannot dry them completely; Bambu Lab recommends the AMS HT for better drying of these filaments. Bambu Lab: “The maximum temperature of the drying function can only be achieved when the ambient temperature is above 25 °C. When the ambient temperature is below 25 °C, due to natural heat dissipation, the actual drying temperature may not reach the maximum value.”
What’s in the box
- Bambu AMS 2 Pro
- Desiccant
- PTFE Tube (185 mm x 2, 225 mm x 2, 900 mm x 1)
- Bambu Bus Cable, 6-pin
The filaments in the picture are sold separately.
Connecting several AMS units to the H2C
Bambu Lab Support shows how to connect several AMS 2 Pro and AMS HT units to the H2C.
- Four spools, drying up to 65 °C
- Up to 4 AMS 2 Pro and 8 AMS HT on an H2 series printer, says Bambu Lab
- Pick your printer in the selector above
Video by Bambu Lab Support (3:05). Plays here, nothing loads until you press play.
Buying from iDesign 365
| Versions | For the H2D and H2C, the H2S or the P2S; pick yours in the selector |
|---|---|
| Drying | Up to 65 °C, says Bambu Lab |
| Warranty | 2 years from Bambu Lab in Canada, with our receipt as an authorized reseller; its terms are written for individual consumers, so schools and businesses, ask us |
| Returns | New, unopened items within 30 days of shipping, refund less a 20% restocking fee |
| Availability | In stock |
Bambu Lab questions
What does the AMS 2 Pro do?
It holds four spools, feeds them to the printer and switches between them during a print, so one part can carry four colours or materials. It also dries filament up to 65 °C, keeps it in sealed storage and actively discharges moisture. Bambu Lab says the top drying temperature needs a room above 25 °C.
Do I need a Switching Adapter?
On the H2C, H2D, H2S and P2S, only to dry filament in more than one AMS 2 Pro at the same time: the printer powers one unit for drying, and each additional unit needs its own Switching Adapter, says Bambu Lab. On X1, P1 and A1 series printers every AMS 2 Pro needs one to use its dryer; the P1S AMS 2 Pro Combo includes it.
AMS, AMS 2 Pro or AMS HT: which one do I need?
The AMS holds four spools without drying. The AMS 2 Pro holds four and dries them up to 65 °C. The AMS HT holds one spool, dries up to 85 °C and has a bypass outlet for TPU, TPE and carbon or glass fibre filaments that the four-spool units cannot feed. Choose the AMS 2 Pro for four colours with drying, and add an AMS HT when you print flexible or fibre-filled materials.
Which option should I pick in the selector?
Choose your printer (H2D or H2C, H2S, or P2S) and how many units you will connect. The “Which option to pick” box in the overview lists the extra parts each printer needs, from Bambu Lab’s own connection rules.
What warranty comes with it?
Bambu Lab gives a 2-year warranty on its printers and on the AMS, AMS 2 Pro and AMS HT in Canada. It needs a purchase receipt from Bambu Lab or an authorized reseller, and as an authorized reseller our receipt qualifies. Bambu Lab’s warranty statement is written for individual consumers, so schools and businesses should ask us about coverage before ordering.
Can my school pay by purchase order or get a quote?
Yes. At checkout, choose Purchase Order and reply to our acknowledgement with your PO, or choose Quote and our sales team will send a detailed quote. Prices are in Canadian dollars.
Related products
You may also like...
Bambu Lab AMS 2 Pro
$449.00
- In stock
- Priced in CAD
- Purchase orders and quotes for schools
- Authorized Canadian Bambu Lab reseller
