Bambu Lab P2S

Both are enclosed and print a 256 mm cube. The P2S is faster (600 mm/s against 500), heats the bed to 110 °C instead of 100, ships with a hardened steel nozzle instead of stainless, and adds a 5-inch touchscreen and a 1080p camera at 30 fps (the P1S camera is 720p at 0.5 fps). Its filter handles particles as well as fumes, and it runs up to 20 colours with AMS 2 Pro and AMS HT units without an AMS Hub. The P1S is the lower-priced way into an enclosed Bambu Lab printer.

The Combo adds an AMS unit, so the printer can switch between four spools in one print. The P2S Combo also includes the Filament Buffer that a P2S bought on its own needs before any AMS can connect. If you will only ever print one colour at a time, the printer on its own is enough.

Yes. A P2S bought on its own needs the Filament Buffer - P2S to connect an AMS or AMS 2 Pro, and Bambu Lab also lists a Bambu Bus Cable (CAB035) for the connection. The P2S Combo already includes the AMS 2 Pro and the buffer.

No. The P2S is fully enclosed, and Bambu Lab says its automatic flap regulates the chamber temperature, but there is no active chamber heating. For a chamber that heats to 65 °C, see the H2S, H2D and H2C.

Bambu Lab gives a 2-year warranty on its printers and on the AMS, AMS 2 Pro and AMS HT in Canada. It needs a purchase receipt from Bambu Lab or an authorized reseller, and as an authorized reseller our receipt qualifies. Bambu Lab’s warranty statement is written for individual consumers, so schools and businesses should ask us about coverage before ordering.

Yes. At checkout, choose Purchase Order and reply to our acknowledgement with your PO, or choose Quote and our sales team will send a detailed quote. Prices are in Canadian dollars.